Calibrator v3.0.7
File Size 22.11 MB
Last Updated 15th February 2026
Version 3 history
2026-02-15 Calibrator v3.0.7
View a youtube video tutorial of all the new version 3 features.
General
- Implemented MAST_ROT and MastRot_offset (PRO version only) for boats with rotating mast where mast rotation comes into play when computing wind.
- The fact that a tack or gybe has been reviewed by the user is now stored in the database.
- Actual calibration values (like speedo%, mhu_offset, etc…) are no longer in the BoatConfig page. You will now be prompted to check/update those values when you start a calibration session.
- If your calibration was modified onboard while sailing (eg: you modified the mhu_offset, or an upwash table) you can now specify those changes in time. In the previous version, you could only specify a single mhu_offset value for the entire session. You can now specify multiple changes during the day (this applies to tables also).
- While you are in the process of doing some calibration, you can now click Menu->File->Save post calibrations to file. That way, if you re-run the Calibrator on a session (eg: in the event of a crash), you can load post calibrations. This is done by using the ‘Load post calibrations’ at the bottom left of the ‘Load data’ page (right after the lof is loaded, and before you click ‘Next’ to start creating phases).
- Started implementing connection between the Calibrator and WebReports. Please enquire with us if you need this option as it requires a licence update.
Phase creation
- You can now specify that when creating or loading phases, phases should be when there was at least the mainsail and one other sail. This is only in the Pro version, in the case that your electronics has multiple upwash tables which you change depending on which sail is up. To activate this function, go to the ‘Manoeuvres’ tab of the BoatConfig window (editing a boat at startup)
- Tracker now has a wand tool (somewhat like in RaceReplay). The wand can be used to find phases in the phase table, delete phases, or ask the Calibrator to only analyse a specific part of the track.
- On the tracker, you can now right-click a phase for a context menu to popup. It will let you view the phase in the phase table, set the wand where the selected phase is, or delete the phase.
Table editing
- During the calibration process, while editing a new 1D or 2D calibration table, new option to highlight changes. This will highlight the cells of the new table for which you have modified a value compared to the old table. If this is active, leave your mouse over the cell to view the differences.
- Even if a table is readonly, it can now be transposed (Menu->Tools->Transpose)
- Possibility to import tables from database
- When editing a 2D table, Menu->Tools->Rows->Add now lets you enter multiple values at once (separated by semi-columns)
- When editing a 2D table, Menu->Tools->Rows->Add now lets you enter multiple values at once (separated by semi-columns)
Other
- SpeedoCalib: Implemented right-click on a point to view it in the phase table.
- CompassCalib: Implemented right-click on a point to view it in the phase table.
- MhuOffset: Implemented right-click on a phase point to view it in the phase table or delete the phase.
- UpwashCalib: You can now right click a tack/gybe point in the TWD graphs and ask to mark them as invalid.
Version 2
2025-10-13 Calibrator v2.16
- When normalizing an Expedition log, output log now contains fields Utc, UtcDate and UtcTIme for better readability with Notepad or Excel.
- Edit2DTable: now highlights points in graph even if for ‘old’ table.
- Edit2DTable: dialog displays a red ReadOnly when applies.
- Edit2DTable: added rounding to no decimals and to closest 0.5
- TackGybes: added TWD indicators in TackGybe validation page.
- Fixed bug in highlighting tack/gybes or phases in Upwash module if log data does not contain origTWS and origTWA
2025-09-02 Calibrator v2.12
- SpeedoCalib: When setting tide manually for multiple measurements during the day, point which will be affected get highlighted, and you can see changes immediately.
- UpwashCalib: When editing a new upwash angle or speed table, selecting cells in the 2D table window will highlight which points are going to be affected.
- CompassCalib: implemented drawing trend line for current when coming from grib or manual_multi.
2025-08-30 Calibrator v2.11
- BoatConfig: new ‘help’ button in TidalCurrent tab.
- BoatConfig: corrected a bug where user could not specify a table for leeway K values as a function of TWS.
- CreatePhases: New filter for min avg bsp and min avg tws.
- SpeedoCalib : Fixed a bug when points get highlighted in the SpeedoCalib when editing a 2D bsp heel cal table which the user asked to show as transposed.
- SpeedoCalib : New option for entering manual current: you can specify multiple tide measurements at different times of the day (it makes the assumption that the measurements are close to where the boat was at the time). For instance, one could go lookup GRIB current data at various times during the day and manually type in those values into the Calibrator.
- SpeedoCalib: Importing current from a GRIB file is still work in progress as some GRIBs work, and others not.
- Edit 1D table: now displays a graph.
2025-06-20 Calibrator v2.10
- Corrected bug for calibrating a log where there is no heel data.
- During the Calibration process, you can use the Menu->View->Boat config to view the BoatConfig (in read-only mode).
- During the Calibration process, you can use the Menu->View->Log config to view the LogConfig (in read-only mode).
- Corrected bug when reading grib1 type current GRIB files.
- Corrected wind calculation algorithm which was incorrectly integrating origTWD
2025-06-17 Calibrator v2.9
- Implemented ‘Load current from GRIB’ in CalibrateSpeedo page..
- CalibrateSpeedo: better highlighting when there are multiple speedos on the boat.
- Corrected bug when user manually specified a root folder in the json init file.
2025-06-11 Calibrator v2.8
- Fixed a bug where values for a 1D bsp vs bsp calibration table were not getting extrapolated correctly (eg: the table was only going to BSP 15kn but the data had speedo values over 15kn).
- Work in progress (next version): possibility to import tidal current data from a grib file.
2025-06-07 Calibrator v2.6
- Fixed bug with 1D heel bsp correction.
- BugReporting now includes event file.
2025-05-23 Calibrator v2.5
- ReviewTackGybe: now display date if log covers multiple days.
- CalibrateSpeedo: When calibrating a boat with speedos on each side, you can view all data for one speedo, even if it is not for its assigned tack.
- CalibrateSpeedo: By default, heel graph shows signed heel. New option to show heel_log.
- CalibrateSpeedo: When editing a calibration table and selecting cells, Calibrator now shows average error for affected (highlighted) points.
2025-05-15 Calibrator v2.4
- Leeway can now come from a lookup table where K is a function of tws.
- Leeway from a 2D lookup table function of bsp and heel has now been added to the Standard version (used to be PRO only).
- SpeedoCalib: error table bottom left now displays 2 decimalsFixed a bug where Calibrator was incorrectly detecting if an imported table was transposed or not, causing bad corrections of bsp vs heel.
2025-05-13 Calibrator v2.3
- Fixed a bug where Calibrator was incorrectly detecting if an imported table was transposed or not, causing bad corrections of bsp vs heel.
2025-05-08 Calibrator v2.2
- Fixed a bug with CompassCalib trendlines.
- Added TWD_mag to output file
2025-05-07 Calibrator v2.1
- Fixed bug in wind calculation when creating output log.
- 1D and 2D Tables: now possible to import/export from Faro format
- Fixed a bug for importing tack Gybes from RaceReplay
2025-05-05 Calibrator v1.18
- Corrected some bugs in 'Explore data' for constant data.
- Corrected bugs in CalibrateComapss when leeway value in log is constant (eg: Leeway=0).
- Corrected bugs where default BSPvsHEEL_2d table was missing value heel=-15.
2025-04-20 Calibrator v1.16
- Corrected some bugs with multi upwash tables.
- Implemented an interface to view/edit calibrations in the database. Menu->Tools->Manage database. Note that you can only add/edit/delete calibrations before you start a calibration. Once a calibration is started, the database browser is view only.
- Initial public release
Recent Comments